Flowmeter series

current locations:HOME - PRODUCTS - Flowmeter series

DY series vortex street flowmeter in yokogawa, Japan

Release time:2019-06-30

Product Name:Japan yokogawa brand DY series vortex street flowmeter

Recommended model:DY050EAMBA12D

Number:DY0001

Order quantity:1

Inventory:100

Product details
Standard multivariable reduction type
Model DY vortex street flowmeter option code: /MV option code: /R1, /R2
Measure fluid liquids, gases, and vapors (avoid multiphase flow and viscous fluids)
Nominal through-diameter: 15mm ~ 300mm
(400mm: special order) 25mm ~ 200mm 25mm ~ 200mm
Precision liquid: reading
Liquid: reading plus or minus 0.75%(D * 1000 is less than or equal to Re) liquid: reading plus or minus 1.0%
(20000 Re 1000 or less or less)
Gas and steam: reading plus or minus 1.0%(flow rate less than 35m/s)
Gas and steam: reading plus or minus 1.5%(velocity: 35m/s ~ 80m/s)
Output signal dual output (both analog and transistor contact output signals can be obtained)
Fluid temperature range - 29 ℃ ~ 260 ℃ (plain)
- 196 ℃ ~ 100 ℃ low temperature type:)
- 29 ℃ ~ 450 ℃ high temperature type:)
Working condition pressure range -0.1MPa (-1kg/cm2) - flange rating
Ambient temperature - 29 ~ 85 ℃ (one size/no display)
- 29 ~ 80 ℃ (one size/monitor)
Separated type - 29 ~ 85 ℃ (sensor)
- 40 ~ 85 ℃ (separated type converter/no display)
- 30 ~ 80 ℃ (separated type converter/with display)
Environmental humidity 5 ~ 100%RH(no condensation)
Installation of one body and separate sensor: flange mounting or clamping mounting through a flange adjacent to the pipe
Separation converter: 2-inch tube installation
Jis10/20/40, ANSI150/300/600/900, jpi150/300/600, DIN pn10/16/25/40
Electrical connection JIS g1/2 internal thread, ANSI 1/2NPT internal thread, ISO M20 x 1.5 internal thread
Electrical specifications: JIS flameproof, FM explosion-proof/safety
ATEX (centering type/safety type /IEC type n)
CSA explosion-proof/safety: double seal
SAA flameproof/bn type
Material case: SCS14A casting stainless steel (equivalent to SUS316, CF8M)
Vortex street generator: two-phase stainless steel (optional: antiseptic)
Sealing washer: SUS316 stainless steel surface coated with teflon coating
Converter housing: aluminum alloy
Application standard * compliant with EMC standards:
En61326-1 Class A, Table 2 (industrial applications), en61326-2-3
EN55011 Class A Group 1