Flowmeter series

current locations:HOME - PRODUCTS - Flowmeter series

Rosemont 8600 series vortex street flowmeter

Release time:2019-06-30

Product Name:Rosemont 8600 series vortex street flowmeter

Recommended model:8600


Order quantity:1


Product details
Product introduction
Rosemont 8600 series vortex street flowmeter
The rosemont vortex street flowmeter adopts advanced measuring technology and provides a series of selected parts for various processes and practical applications.
Rosemount 8600 Utility ™ vortex flowmeter by reducing the potential leakage points and eliminate the demand for pressure pipe guide, improve reliability and reduce the cost of installation.
Product features
Reliability 8600 series vortex street flowmeter is more reliable than traditional flow measurement technology.
The anti-vibration sensor system has a unique quality balance structure and adopts adaptive digital signal processing (ADSP) technology, with excellent anti-vibration performance.
Simplified troubleshooting can be carried out by on-site calibration of instrument electronic components and instrument calibration through equipment diagnostic function.
Product specification
The 8600 multivariable vortex street flowmeter reduces installation cost, simplifies installation and improves performance in saturated steam:
Multivariable vortex street design
The temperature sensor is integrated into the vortex street instrument by using the vortex generator as the heat sleeve, so as to keep the temperature sensor isolated from the process media and facilitate verification and replacement.
Temperature compensation function of saturated steam
The density is calculated from the measured temperature and the calculated density is used to provide temperature compensation for mass flow.
Improve performance in saturated steam
As the electronic components will compensate for the temperature change of the process, the performance of the work in the saturated steam is improved.
Reduce installation cost
The multivariable vortex flow meter does not require external thermocouple sleeves and temperature sensors.
Output options
Able to convert independent variables into analog output, pulse output, or HART signals.
Equipped with a traffic computer to provide additional functionality
The whole pressure and temperature compensation of superheated steam and various gases can be realized by integrating multivariable vortex flow meter with pressure transmitter.
Split electronic components
It provides split electronic components up to 23 meters (75 feet) long.
After integrating the multivariable vortex street flowmeter with the rosemount flow computer, you can:
The remote communication
The heat calculation
Remote cumulative
Peak demand calculation
Data recording capability
Functional specifications:
Process fluid
Liquid, gas and steam applications. The fluid must be homogeneous and in a single phase state.
Line size
Flange :DN 25, 40, 50, 80, 100, 150 and 200 (1, 11/2, 2, 3, 4, 6 and 8 inches)
Standard pipe specification
Process piping includes standard piping specifications 10, 40, 80, and 160.
Process temperature limitation:
- 50 to 250 ° C (58 to 482 ° F) -
The output signal
4-20 mA digital HART signal
Superimposed on 4-20 mA signal
Optional adjustable calibration pulse output
0 to 10,000 Hz; Transistor on and off and adjustable calibration through HART communication; Able to switch to a maximum of 30 Vdc and 120 mA.
Analog output control
The engineering unit and the high and low range value can be selected by the user. Output is automatically converted to provide 4 mA at low range and 20 mA at high range. Adjust range without frequency input.
Ambient temperature limit
- 50 to 85 ° C (58 to 185 ° F) -
For flow meter is equipped with the display, for 20 to 85 ° C - (-- 4 to 185 ° F)
- 50 to 121 ° C (58 to 250 ° F) -
For equipped with the display meter for 46 to 85 ° C - (- 50 to 185 ° F)
Pressure limit
Flange flow meter
Rated ASME B16.5 (ANSI) 150, 300, EN 1092-1 PN 16 and 40.